DITRIO 12pcs Underglow RGB LED Strip Light Kit DC 12V with 2 Red Blinking Brake Light Styles for Motorcycles Trikes Golf Carts ATVs UTVs – M12r
Buy DITRIO 12pcs Underglow RGB LED Strip Light Kit DC 12V with 2 Red Blinking Brake Light Styles for Motorcycles Trikes Golf Carts ATVs UTVs – M12r: Accessory Light Kits - ✓ FREE DELIVERY possible on eligible purchases
First let me say that excellent customer service means a LOT in the world of online shopping. This seller is all about great CS! 10 stars for excellent customer service!
I ordered this LED light kit after returning a similar kit (different vendor) because it was DOA with no instructions, no contact info, no documentation. DiTRIO was the exact opposite. They provide instructions and good documentation with color graphics. The kit is well packaged and protected. Best of all - they include a direct email address if you have questions or run into issue...which I did.
The first DiTRIO kit I received had been clearly returned by a previous customer to Amazon for having one (of 12) bad LED pod, which was wrapped in scrap paper (see pictures). Amazon (not the seller) must have restocked the kit without replacing the bad pod, which got sent to me on my order. Luckily I did a bench test prior to installation and discovered the bad pod. Thankfully, DiTRIO includes a direct email. I emailed them about the bad pod, thinking it would be easier to replace the one pod. DiTRIO emailed me back THE SAME DAY and promised to send a whole, completely new kit. They sent a whole kit, two-day shipping! No return required. WOW! That is excellent customer service!!
Here is why Is said "4 stars for the kit." The kit works fine...most of the time. As described and pictured here on Amazon, there is a control module with a LONG power lead. There is a master power button off that control module on a LONG lead. There is one 2/1 'Y' splitters. There are two 6/1 splitters. And then there are a total of 12 LED pods; four each of short, medium and long. There is a massive bundle of wires that require being taped, tied and tucked out of the way. I am riding a Honda Fury chopper...so not a lot of room between the side covers. It was a SQUEEZE to get all that wiring tucked in, which may contribute to why my remote doesn't have great range. At some point in the future I will replace the battery to see if it helps with the range, but for now it's all working.
Small issues: The instructions are good, but have some misinformation. The buttons are mislabeled on the instructions. But just play with the remote and you'll get the hang of the operation. Sometimes, not all the time, I have to press the color-change button multiple times to get the color to cycle through. Other times it takes one click to advance. The remote seems to have a "mind of its own" sometimes. Similarly, sometimes but not all the time, when I press the light mode buttons, the lights "behave" and other times they do not, requiring multiple clicks. The LED pod leads are not as long I would have liked, especially for pods mounted forward of the tank. For all the cables and wires, you may still need to consider ordering a 4-pack of lead extensions (my recommendation is this 4-pack of extensions which has similarly excellent wire protection and weather resistance: https://smile.amazon.com/gp/product/B078TDJHS7/).
This is minor stuff, and overall I'm very happy. I'd totally order this exact kit again, and recommend to everyone.
Noteworthy differences in this kit vs other kits I've ordered and returned, or used on other bikes:
Everything seems to be of very high quality. The cables are thick and each end has heat-shrink covering all wires up to the connection points. The LED pods are thick yet flexible. The 3M backing tape is strong! Just make sure you do a thorough job of cleaning the surface where the pod will be mounted and also make sure to degrease, de-dirt/dust and strip any waxes or protective coatings from the surface.
The brake light interface is my favorite feature! I posted a video showing the brake light feature in action. No matter what color the LEDs are set for, all pods go solid red when you hit your brakes. I love that feature. I would caution you to make sure that you're not a "brake pumper" if you live in a state where flashing lights or alternating red/blue lights are reserved only for law enforcement. It's also worth noting that if your LEDs are set to solid red then there's no differentiation when you hit the brakes, as all LEDs are already solid red.
The kit comes with two remotes. One remote is for your pocket, everyday use. The other remote is for "tuning" the light colors and brightness to your liking, and you will likely leave it in your tool box once you get everything set the way you like. The kit also comes with extra wire leads, some 2-sided tape and a couple of fork spade connectors for the power connections. The kit does not come with any t-tap or butt connectors for the brake lead, so you may want to pick up some basic electrical connectors before you begin (or use LOTS of electrical tape).
Make sure when you install the pods on a moving part (e.g. the lower swing arm which pivots, front forks, etc) you give the wires enough "play" to move freely through the whole range of motion, yet not too much slack so as to get tangled in anything during minimal positioning. That could lead to the pods being damaged...or worse. Think before you "nail" everything in place.
Pictures in my review:
The first picture is from the first kit that came with the dead pod, wrapped in paper. I circled the end of the lead to show how the well the wires ends are protected, which is true for all the pods and wires. I love it!
The remaining pics and videos are of the various light colors and testing the brake light option.
I hope this review helps with your LED purchase decision and helps to dress up and customize your ride!
I have installed a few light kits before purchasing this one. One of the reasons I chose this particular kit was because of its ability to change colors, as well as the price. Once it arrived, I found that it had more features that I like.
First of all, the wiring is much thicker than on the kits I had previously installed. Second, it has quick-connectors in between every part of the system. This is very convenient for when you have to do maintenance on your bike and have to remove your tank: it means that you don't have to remove the lights from the tank: you can just disconnect the lights from the wiring harness.
Next, the kit comes with two remotes: one on a key chain, and the other is a bit larger yet thin, and allows you to choose the color and display pattern without having to scroll through.
Finally, the kit came with so many lights that I don't have a place to put them all: it really could be enough for two motorcycles. I ended up using just four of the light bars, and I'm quite pleased with the result. I may go back later and add more, which would be easy to do thanks to the quick connectors.
5 colors are shown, but there are many more colors available.
Old/Original Review:
Ordered this for the motorcycle because it has the brake light feature. It worked a couple of times, then quit working altogether. Tried to get a replacement, but all they do is let me return it. I'd prefer to have the just replaced the box, but now I have to take/peel the damn things off the bike so I can return them.
UPDATE!!!
After writing the previous review, I was contacted directly by DITRIO. Whereas Amazon wanted me to return all the parts for a refund, or return some of the parts for a partial refund, DITRIO contacted me to let me know that I should not take anything off the motorcycle, and they would work with me to resolve the problem. DITRIO offered several options, from sending me a complete replacement kit, to sending me just certain replacement parts. They were able to help me diagnose what may be wrong (turns out it was a bad control module), and then proceeded to send me a new kit. DITRIO's customer service has been awesome!
As for the lights, they work great! I have used several different light kits on a couple of different bikes, and a friend has used a more expensive system on his. These lights easily compete with his. The only exception is that these are not Bluetooth. Okay, so I have to use one of the two remotes (each with its own features). These lights work great with music, in fade or flash mode, or just simply in a solid light mode. The variety of light colors is also fantastic. The primary reason I chose this kit for both my wife's and my bike is the brake light feature. Whether the lights are on or off, or what color they are on, the lights all turn red when you hit the brake (if you connect it to the brake light wire). During the daylight, they may not be great, but they do provide better light. At night, they light the entire bike.
For the price and features, especially with the fantastic customer service, I highly recommend the DITRIO light kit.
Hard to write a review because I will not be using this product til spring and bike weather
Great product. Only time will tell concerning adhesion.
Price: US $55.99
Rating: 4.6 / 5.0 from 2 Reviews
Specification
➤Quality & Reliability as Priorities: LED strip kits for motorcycles have difficult working conditions – fluctuating voltages, instantaneous higher currents etc., this LED strip kit focuses on how to make it work and last.
➤Maximum Brightness: LEDs with gold bonding wires – 30% higher electrical conductivity, 3.55% more light than the cost-effective material copper; 60 LEDs per meter, up to 1,000 Lumens per meter.
➤Bigger Capacities for Brighter Bikes: 3 x 3A big MOSFETs, wires of AWG 22 & 24, ensuring strips more than enough power supply even you double the strips for a bright “Christmas tree”.
➤2 Additional Blinking Brake Lighting Styles: Besides the default solid red light as an additional brake signal, M12r now comes with 2 blinking styles, available via the 24-key remote.
➤Music Mode: An independent microphone in the control box, gold-plated pins, a 60X sensitivity, beautifully follows the rhythms of your music.
Description
DITRIO RGB Neon LED Strip Kit with Blinking Brake Light Features for Motorcycles
Make Your Motorcycles More Noticeable at Night
LED strip kits appear to be identical, but actually they can be very different inside.
- Some technical details are critical for their performance and reliability.
- It’s better to pick a good design, which has taken them into consideration.
- After all, you will need to spend time or money on installation.
For each component and each material, DITRIO takes quality as a priority over cost.
- The contents below explain some of the key points.
- They will help you understand what they are and why they matter.
DUAL-LAYER PCBS & EXTRUDED SILICONE TUBES
More Durable, Flexible and Less Likely For LEDs to Fail
DITRIO chooses dual-layer PCBs for the LEDs and cover them with transparent silicone extrusions.
- The dual-layer PCBs are more resistant to pulling, bending or twisting, which are common causes for the LEDs to go off on single-layer PCBs.
- The silicone extrusion is an upgraded industrial technique, not bringing negative chemical reaction on LEDs, which shortens their life span.
- Last but not least, silicone extrusions are more flexible for curved surfaces, even without a hot wind gun to preheat.
INDUCTOR & CAPACITOR
Prevent Rapid Changes in Power Supply That Can Cause Circuit Failures
The current goes multiple times higher and the voltage jumps up to 15V when the engine starts.
These dramatic changes can be fatal for electrical components and the circuit board may fail.
- Use an inductor as a protection device for current transients to ensure that the current cannot change instantaneously
- Use a capacitor to preserve voltage by storing energy in an electric field to maintain the voltage as near unity as possible
- They work together to clean up the power supply for the circuit, so it works and lasts.
SELF-PROTECTIVE MECHANISMS
2 Built-In Features Against Abnormal Conditions
Needless to say, you will install the LED strips properly, but sometimes unexpected issues may occur.
Therefore, DITRIO designs the circuit with 2 self-protective functions to withstand short circuits and reverse connection.
- The circuit cuts off automatically when a short circuit occurs, and goes back to normal after the short circuit is removed.
- You won’t damage anything in case you mistakenly reverse the connection of the red and the black wires for power supply.
REPLACEABLE KILL SWITCH
Get It Back to Work in a Plug & Play Way
We use a waterproof fast locking connector to connect the kill switch to the control box.
You won’t need to remove the whole control module if it malfunctions.
- Replacement is available upon request for after sales service.
ITEMS INSIDE PACKAGE
1). RGB LED Strips
- 4 x 12.7” LED strips, with 6 LEDs each strip
- 4 x 8.7” LED strips, with 12 LEDs each strip
- 4 x 4.7” LED strips, with 18 LEDs each strip
2). Control Box and Wires
- Control box (with a kill switch and an inline fuse)
- 1 x 4-Key RF remote
- 1 x 24-Key RF remote
- 1 x 1-2way splitters (AWG22 for power supply)
- 2 x 1-2way splitters (AWG24 for splitting into 4 zones)
- 4 x 1-3way splitters
3). Installation Assistant Items
- 1 x Velcro sticker for remotes
- 2 x Ring terminals
- 1 x Double sided adhesive for control box
- 1 x Instructional booklet
- 1 Bunch x zip ties for organizing wires
Parameters
- Material for LED Strips: Silicone Extrusion
- Input Voltage: DC 10 - 30V
- Working Temperature: 30°F - 110 °F
- Effective Range of RF Remote: 30 ft
- IP68 Waterproof for LED strips (not for remotes & control box)
- Nominal power: Maximum 36 watts
- Battery draw: Approximately minimum 0.5A at DC 12V
- Battery draw: Approximately maximum 1.7 A at DC 12V
I put these on my motorcycle l love the different colours my bike looks great now.
After a bit of work and time super hapoy with the product.
Product information
Technical Details
| Manufacturer | DITRIO |
|---|---|
| Brand | DITRIO |
| Model | ML-10 |
| Item Weight | 1.41 pounds |
| Product Dimensions | 6.89 x 10.83 x 2.09 inches |
| Item model number | 5824071253 |
| Batteries | 2 CR123A batteries required. |
| Is Discontinued By Manufacturer | No |
| Manufacturer Part Number | US-ML-10 |
| Position | Outside |
| Folding | No |
| Bulb Type | LED |
| Special Features | B, Bl, 2 Blinking brake light |
| Mirror Lighting Type | Automotive-engine-compartment-under-hood-light-bulbs |
| Vehicle Service Type | Cruiser, Golf Cart, Motorcycle, ATV, Scooter, UTV, Truck, Snowmobile, Pickup Truck |
| Voltage | 12 volts_of_direct_current |
4.6 out of 5 stars
#1 in Powersports Accessory Light Kits
Warranty & Support
Product Warranty:For warranty information about this product, please click hereFeedback
0 comments:
Post a Comment