HJC FG-17 Chin Curtain Street Motorcycle Helmet Accessories - Black/One Size
Buy HJC FG-17 Chin Curtain Street Motorcycle Helmet Accessories - Black/One Size: Helmet Pads - ✓ FREE DELIVERY possible on eligible purchases
This thing should be included in all full face helmets, in my opinion, but they usually are not, as was the case with my HJC FG-17. I ride a naked/standard motorcycle and without wind protection/management on the bike, a lot of turbulence does wash up past my chin into the breathbox. Specks of dust or dirt, and even small bugs were able to get in which is a distraction at best, and dangerous at worst. It is a small price to pay to get one of these to keep air and debris from blowing up in your face. They are not meant to insulate heat. They are made of mesh material so you can breath. They are pressed into the seams like other components in a lot of helmets.
First off, I've seen a lot of reviews stating the chin curtain does not stay in robustly. My guess is that those users did not fully install it. On my FG-17 size large, it took a whole lot of effort to get the tabs to fully inset between the shell and EPS. Now that's in, it feels very sturdy, and I've taken the helmet on and off (and used it on highway and side streets) with no detectable shift or loosening. So overall it was difficult to install - though not complicated, but retains very well.
It's spread pretty tight across the opening, so is a little uncomfortable when putting the helmet on/off, and rubs over part of my face. But once the helmet is on, can't feel it.
While riding, it provides a small reduction in air circulation into the helmet. I don't think it will really reduce wind noise, but will provide a slight increase in warmth due to slower air flow on the face. It's a pretty thin mesh; if you're looking to maximize your helmet warmth, I'd suggest adding your own layer of a less breathable material (velcro, a few stitches, glue?).
I thought this was a "solid" curtian, not a mesh one, but as I live in the desert it worked out. It stays in place, and helps keep out all manner of flying things.
Cuts down a little on wind noise.
Cuts down a bit on cold air rushing past your nose and mouth.
I used to get cold in this helmet at about 55f and with the chin curtain its comfortable to about 40ish.
Its just mesh so it doesn't really stop the exchange of air, it just stops wind from blowing into your mouthbox.
The installation wasn't too hard but it doesn't fit very securely. If you're not careful taking the helmet off you can pop the chin curtain out easily. I find myself worrying sometimes that i've popped it out a little bit just using it while riding, and that it might fall onto the roadway at speed, I'll probably glue it into place
It doesn't block out all the wind, but it definitely cuts back on it. I live in Southern California, and this helps on chilling morning rides to work. In the afternoon, when it's warmed up to the mid-80s, there's still enough airflow to keep me comfortable. It also keeps bugs out of my helmet, which is awesome. I kinda wish it would block a little more wind, but it's sufficient.
Price: US $12.10
Rating: 4.1 / 5.0 from 84 Reviews
Specification
It is hjc's continual goal to provide high quality, comfortable
And reasonably priced helmets to motorcyclists around the world
Hjc FG-17 Chin Curtain replacement parts
Imported
Description
It is HJC's continual goal to provide high quality, comfortable
And reasonably priced helmets to motorcyclists around the world
Hjc FG-17 Chin Curtain replacement parts
Imported
This helmet chin curtain performed well and I'm still getting some use out of it...however...it has torn at a seam where the plastic helmet insert connects to the chin curtain part. Since it's already coming apart I don't expect this to last even a year.
The Chin Curtain is decent. It does what it's supposed to do: Keep out bugs and debris.
I think it also reduces the wind by just a bit, but it's mesh so it still flows a lot of air.
Don't expect this to reduce a lot of wind noise. (The FG-17 is fairly noisy anyways.)
Still, $10 feels like a lot for what it is and the amount of materials. Other than that, I think it's pretty good.
Keeps crap from flying up into your helmet on the highway. Makes for a quieter ride too. Don't know why I waited so long to get one. I have another, identical helmet and will be ordering another one.
Product information
Technical Details
| Manufacturer | HJC |
|---|---|
| Brand | HJC Helmets |
| Model | Chin Curtain for Fg-17 Helmets |
| Item Weight | 0.458 ounces |
| Product Dimensions | 2 x 2 x 1 inches |
| Item model number | 0917-3705-00 |
| Is Discontinued By Manufacturer | No |
| Manufacturer Part Number | 0917-3705-00 |
| Safety Rating | Other |
Additional Information
| ASIN | B00JDPUJKE |
|---|---|
| Customer Reviews | |
0 comments:
Post a Comment