Memphis Shades Demon Windshield with Handlebar Mounting Kit (Clear)
: Memphis Shades Demon Windshield with Handlebar Mounting Kit (Clear): Automotive
Below was my initial review that I had left at 3 Stars until I had sufficient time to evaluate my purchase and I am happy to upgrade this to a 5 star rating. I am still slightly disappointed that the coverage is not over my grips but I take blame on that for not researching better. But the counter to that and also my big concern was the size of the windshield. This is considerably smaller than my previous and I did not think it would deflect the wind as well as the first. This smaller windshield deflects the wind even better. My other would give me a wake at the helmet due to my being 6'1". It is my belief that this windshields shape disperses the wind and eliminates that. It stays tight and is easily adjustable in small moves. First thing I noticed was it was not quite even on my handle bars after the first ride. It was an easy fix. I keep a set of tools on my bike for any road side repair so I recommend keeping Allen Wrenches handy as well if you do not already. Now all I need to do is find some wind guards for my grips that match the windshield. Memphis Shades? Little help maybe? 2003 VTX 1800c.
This may fit the Honda VTX 1800c but it is tiny. I bought it after seeing it in photos on a 1300 VTX. My fault for not realizing the width difference on the two bikes. The picture appears to give grip coverage but on my 1800, absolutely not.
Installation was with minor difficulty. My advice is to mount the handle bar hardware first. Then put the mounts and grommets on the windshield then you can put the windshield on. 3 easy steps. Took me all of 15 minutes once I figured that out. I saw a review on here saying you need 2 people. At first i agreed but then studied it for a bit and the above 3 steps is the way to go. Also, DO NOT TIGHTEN till you have it where you want it. Sit on the bike and straiten it all out while it is semi tight. once you have it where you want it, tighten her up. The mounts that slide up and down are easy to adjust after all of that. I will post a photo on this review later and may up my star rating once i have had her out on the open road. it may be small but if it does what i want, I am good. My fear is with handle bar mounts that it will have some vibration or under drag to it pulling my control. On a big bike that is a bad deal. More later.
The shield itself was a bit of PITA to install and getting the right angle, etc as I installed myself with no help. The instructions were 'so so' and I could've def benefited from having another already-installed shield on a buddy's bike to reference. However, once done, I was very impressed and have had several others comment that it looks great! I may have ordered a shield slightly too short as I still bet a great bit of wind buffeting on the top of noggin (I'm right at 5'10" and have the shield mounted high as possible I think), but is easily resolved by crouching a slight bit fully behind the shield and looking through it while riding. In all, would highly recommend for the look and price-point for an 883 Sporty.
This Windshield is very nice and fit excellent on my VTX 1300. The price is a little high for what you get, it's basically $95 for the shield and another $100 for the Hardware which in my opinion the Hardware is over priced. Again very nice windshield.
For the price, you really can't beat it. I was replacing a Hellcat (smaller shield) with this one is wider, didn't want a large tombstone looking shield. Love the tint and mounting hardware! Great part is that I was able to use my old mounting hardware that is identical to this which ends up giving me a spare. Nothing cheap about Memphis Shades hardware, no plastic anywhere. Took me only about 10 minutes with just a little adjustment.
There is NOTHING I like about this windshield. I just purchased it to mount on my 08 Soft ail Cistom, and really wish I wouldn't have installed it, because now I can't return it. It is TINY, and looks tiny. It does not help block the wind, I raised it up as high as 3-4", above the headlight, and riding, I'm still looking over top the windshield (I'm 6' even). Really wish I would have went with a different windshield. As far as installation, like everyone else stated, good luck getting it even, and adjusted, it will take two people.
Price: US $188.25
Rating: 4.5 / 5.0 from 55 Reviews
Specification
Fits most round headlights.
Available in clear, gradient black and solar (a light tint with 72% visible light transmission).
Made of Lucite® for excellent clarity and weather resistance.
Measures 21" wide x approximately 18" high above headlight.
Polished billet aluminum handlebar clamp that fits 1" and 7/8" handlebars.
Description
Color:CLEAR
All hardware is CNC-machined billet aluminum and polished stainless steel. Universal two-point handlebar mount hardware included with windshield. Made in the U.S.A. Windshield Specifications:Height: 18" (approximate).Width: 21".Cutout: Yes.Material: Lucit
Love it, cuts most, but not all of the wind. Definitely need 2 people for installation and the directions are weak.
Overall very happy with my purchase.
For the first time was able to ride for hours without fatigue.
Bought this for my girlfriends bike after she complained about the wind on short neighborhood rides. Now, we were about to go on a four hour all highway ride. This shield worked out excellent. But, you really NEED TWO people to put this child on without getting frustrated!! NOW, TAKE MY ADVICE ON THAT TIP!! 2 PEOPLE!!
I mounted this on my beautiful Borgout custom chopper..the bars are 1 1/2 inches so I ordered the largest rings which were only 1 1/4 inches and went to work with my sander and bought longer stainless bolts..it took a bit of work but I managed to get them rounded to fit..the adjustment on the screen brackets are amazing in adjustment..it looks nice..small yet enough to sheer the Arizona winter air..I hate the cold but this handsome shield does enough to help. I'll try to post some pic's.. I bought the gradient black...damn, it looks great..so many compliments. gypsyjoe
Wonderful fit love it
Product information
Color:CLEARTechnical Details
| Manufacturer | Memphis Shades |
|---|---|
| Brand | Memphis Shades |
| Model | Memphis Shades Demon Windshield With Handlebar Mou |
| Item Weight | 2 pounds |
| Product Dimensions | 22.5 x 22 x 7 inches |
| Item model number | MEM2210 |
| Is Discontinued By Manufacturer | No |
| Exterior | Smooth |
| Manufacturer Part Number | MEM2210 |
| OEM Part Number | MEM2210 |
| Vehicle Service Type | Cruiser/Touring |
Additional Information
| ASIN | B000GS0AZQ |
|---|---|
| Customer Reviews | |
0 comments:
Post a Comment