LS2 Helmets Blaze Adventure Helmet (Matte Black - 2X-Large)
Buy LS2 Helmets Blaze Adventure Helmet (Matte Black - 2X-Large): Helmets - ✓ FREE DELIVERY possible on eligible purchases
So I actually ordered 2 of these. One large that was way too small despite using the sizing chart, and then an XL that fit but had other issues. The construction is just not what I'd hoped for, it was "creaky" for lack of a better descriptor. The face shield was impossible to open with one hand when snapped closed, the drop down visor would catch halfway down and then need and extra pull on the slide to get it down. The cheek pads are held on by little plastic tabs that pulled loose on one side the second time I put it on. The killer was the hairline crack in the outer shell just under one of the rear vents. I know it's a budget helmet, but I've had much better for even less. I wound up spending more and got the Scorpion EXO-AT950.
Pretty descent helmet for the price, has very nice features. Fits well. When I rode in cool weather the clear shield started to fog up, just a little lift to provide 1/2” air gap from closed position did the trick. The retractable tinted visor is awesome and can be used with RX eyeglasses, does not hit them when lowered. I hope this review helps you all.
This is a great helmet. It does run smaller than others, measure your head as everyone is different. I wear a medium (female). This medium fits quite a bit tighter than my other helmet, but I feel a large would've been too big for me. My husband normally wears a large but he purchased the XL and was glad he did! You might error on the larger size if your measurement is questionable.
Very nice! I recommend to order one sice bigger. Normally I wear a medium, but I ordered a Large and it fits perfectly. Medium would defently be to small.
There is an air vent in the front witch you can close from the inside of the helmet.
Received the helmet today to find out the visor pin is broken and the the visor scratches the helmet from one side
Price: US $149.98
Rating: 4.4 / 5.0 from 64 Reviews
Specification
Kinetic Polymer Alloy (KPA) shell offers high strength, light weight and built-in flexibility for energy management
3 shell sizes for the lightest, smallest helmet possible in your head size
Built-in drop-down sun shield
DOT approved. Meets the FMVSS 218 Standard, product also meets requirements imposed by the California Air Resources Board (CARB)
Multi-port flow-through ventilation
Description
Size:XX-Large | Color:Matte Black
Blaze your own trail with the LS2 Helmets Blaze. This full face ADV/UTV helmet takes all the performance of a modern MX helmet and adds the features needed to make it the ultimate ADV or UTV helmet. Start with the shell. LS2 uses their proprietary Kinetic Polymer Alloy (KPA) for the shell. It’s lightweight, offers just a little flex as part of the energy management system, and is ultra-strong. It tests as well as the best composite materials in the world and is the perfect material for a racing helmet. This proprietary material uses nanotechnology to blend microscopic particles of aramid fibers into a high-end polymer. This material is absolute state-of-the-art in energy management materials, offering a bit of built-in flexibility to disperse energy, the penetration resistance of high-end fiber products, and a lightweight shell. LS2 uses 3 separate shell sizes so you get the smallest, lightest shell possible for your personal head size. The EPS safety liner is made with true multi-density material in all 360 degrees of coverage for optimal energy management. The interior comfort padding uses a high-tech fabric that wicks moisture, dries quickly and keeps the pilot cooler and more comfortable. The liner is fully removable and washable (always wash by hand and air dry) and utilizes LS2’s Emergency Release System, there if you ever need it. Our comfort pads are pre-curved using LS2’s 3D laser technology for all-day comfort and no hot spots. Multiple intake and exhaust ports are ported through the internal EPS to allow flow-through ventilation. Now add a face shield made from optically correct Class A polycarbonate, an internal, built in drop-down sun shield, and a quick release chin strap and you have what might be the most versatile adventure or UTV helmet on the market. Meets or exceeds both DOT FMVSS 218 and ECE 22.05 certification. DOT approved. Meets the FMVSS 218 Standard, product also meets requirements imposed by the California Air Resources Board (CARB)
Very nice helmet but had to send back as flip down visor did not work straight out of the box. Poor QC or dealer sent one that had been mishandled.
Super nice helmet. Fits smaller than compared to other LS2 sized helmets.
Good helmet get size up from normal helmet
Product information
Size:XX-Large | Color:Matte BlackTechnical Details
| Manufacturer | LS2 Helmets |
|---|---|
| Brand | LS2 |
| Model | Blaze |
| Item Weight | 5.44 pounds |
| Product Dimensions | 12 x 12 x 17 inches |
| Item model number | Blaze |
| Manufacturer Part Number | 436B-1016 |
| OEM Part Number | 436B-1016 |
| Safety Rating | DOT Certified |
| Vehicle Service Type | UTV |
Additional Information
| ASIN | B084D96KW7 |
|---|---|
| Customer Reviews | |
0 comments:
Post a Comment