Slipstreamer 20 in. Clear SS-32 Falcon Windshield w/Chrome Quick Release Hardware
: Slipstreamer 20 in. Clear SS-32 Falcon Windshield w/Chrome Quick Release Hardware: Automotive
**UPDATE** 10/29 - finally got it installed. I didnt cut any wires, so I used the HD harness and plugged the wires directly into the harness.
Works REALLY well. Definitely a nice upgrade if you dont like the super long brake light, or are looking to ditch the turn signals.
Light is VERY bright. Im impressed compared to the stock HD light. Its a lot shorter too. The integrated turn signals are nice too, and dont affect the fronts at all. Check out my video.
Instructions are pretty basic, I did a little trial and error to find the right wires to what - but after i DID find my manual had a good option for tracking down which wire is which. I included both the wiring diagram, AND the wires I used on my 08 sportster.
great little light. Five wires to install and 2 screws. Great workmanship. Checked the brightness and it's very bright. Should work very well. I don't have a licence plate above my tail so I clipped the leads to the LEDs pointing up (they didn't come that way). Very thin, about 1/2 the thickness of the stock light.
Great tail light!! This review is for the newer version that is shipping with the darker lens. The tail light looks and functions great!! The smoked lens is dark and really cleans up my Sportster's rear fender. The integrated turn signals are bright and work well. The quality is really good. You can't bet the value this tail light offers. I highly recommend. Please see the attached pictures and the video of the operation.
Oh wow, by far the best looking low profile smoking hot bright thing of them all. And not that expensive. I would pay few more buck to have with connector, those connector are hard to find with the pins. I did have to put in pieces the original connector and weld the wires to it. (kind of rigging it)
The wiring is easy. It come with a good thick foam to waterproof the thing but I kind of have dought that would be sufficient to prevent water infiltration and mess up the thing with all the welds exposed at the back, down to the bottom. I did add some gorilla tape ;-) to prevent infiltration from the big opening of the original fixture to prevent water to infiltrate the thing. I'm concerned if water find it way there or condensation, there's no way out. I'll see if it's an issue, I ride rain or shine than I will know and pass on the info.
See the pic, it worth a thousand words, the final look priceless, Love-it
The tail light arrived quickly and was what I expected. It’s bright, low profile, and looks great on my 99 Sportster XL1200C. I love the LED color of the license plate lighting. It’s the style I was looking for to match my smoked turn signal lenses. I used the stock, silver ring and fit this inside. I didn’t connect the turn signal wiring as I didn’t need additional turn signaling. Maybe someday if I’m inspired to open it up I’ll do that.
The downside. As mentioned in other reviews it doesn’t quite fit correctly in the stock silver ring. There are gaps because t wasn’t molded exactly. To correct this I used a razor knife and scraped/shaved some high spots on the side of the light so, with some “persuasion”, it sits perfectly and snuggly in the ring. It’s gorgeous now!
I gave it 4 stars because it requires some effort to fit properly and correctly. Overall I’m happy with this tail light and I recommend it!
I wasn’t sure what to buy for my 02 Sportster but man this thing is cool took 10 min to install and was shipped quick
Price: US $305.75
Rating: 4.3 / 5.0 from 1 Reviews
Specification
SS-32 Falcon windshield has the same features as the SS-30
Unique design combines classic styling of American vintage cruiser shield with classic touring shield features like size and hand protection
Mount systems have a show-quality, triple-chrome-plated or black finish
DOT approved
Made in the USA
Description
SS-32 Falcon windshield has the same features as the SS-30.
Unique design combines classic styling of American vintage cruiser shield with classic touring shield features like size and hand protection.
Mount systems have a show-quality, triple-chrome-plated or black finish.
DOT approved.
Made in the USA.
Tapered Fork Mounting System
Fit and worked good really like the integrated turn signals. It is much brighter than stock even with the smoked lens. This in not plug and play so if you not experienced with a soldering iron you may want to pass. I also had an issue with the original the vendor was very responsive and resolved my issue timely via email.
I figured that I would give this taillight a try, since it wasn't that expensive. I was pleasantly surprised at how well it works and how easy it was to install. I usually upgrade to LED lighting on all my bikes, and this is a good LED light for the cost. My only negative comment is that the housing itself doesn fit quite as well as stock where it meets up to the bracket. There is a very slight curve, and this light is flat. However, if you tightend the screws and use the included foam, it seals up fairly well.
I'm in love with my new taillight. It's so much brighter than my old one and I love having the turn signals in with it. I've always wanted one myself, when I saw it on others...FINALLY I have my own and very happy with it. It was very easy to install as well, with great instructions & manual....even a blonde can do it (no disrespect to blondes, because I am a blonde myself).
If you're in the market for a great taillight....get this one. Can't go wrong with this one.
Light plastic is thick and good quality. Fit is perfect on my 2009 dyna. Plugged in correctly. I did not use the signal option, only the taillight and brake light. I was kind of expecting a super bright led but this one is better than the incandescent. Worth the price.
Looks much better than the stock Harley FXST tail light, installation was very easy but it is not plug and play I had to cut and remove my stock harness and solder it onto this lights wiring but that easy as pie. It is a very bright LED light even for having such a dark tint on it. It also came with a new piece of weather stripping/foam which was nice and i also added a gorilla tape to the back of the board just to help with little more weather proofing but all and all this is a must have upgrade!!!
Product information
| Product Dimensions | 30 x 27 x 9 inches |
|---|---|
| Item Weight | 12 pounds |
| Manufacturer | Slipstreamer |
| ASIN | B071HKWCB1 |
| Best Sellers Rank | #3,042,649 in Automotive (See Top 100 in Automotive) #7,396 in Powersports Windshields |
| Is Discontinued By Manufacturer | No |
| Date First Available | October 16, 2016 |
Warranty & Support
Product Warranty:For warranty information about this product, please click hereFeedback
Products related to this itemSponsoredHide feedback
0 comments:
Post a Comment